Hello!
Good afternoon,I am currently looking for Piping Designers, PDMS Designers and a few other (see below) to work with an EPC company in Muscat , Oman . The said c and idate should have the following:-
Piping Designers/ Mechanical Designers/ Pipeline Designers/ Electrical Designers/ Control & Automation Designers/ Civil Engineering Drawings)
Qualification:
Senior Designer - minimum HND or Diploma in Engineering.
Designer / Junior – minimum HND/HNC or certificate from recognized training institute in engineering. Lower level qualifications may be considered only in exceptional cases of having a good level of experience to compensate.
MUST already residing in the GCC Countries.
Experience:
Senior Designer - shall have a minimum of 12 years related experience plus proven capability in an engineering design firm. Minimum of 5 years experience in design of oil & gas facilities with extensive experience in front end and detailed design, plus proven experience in AutoCAD.
Designer - minimum of 4-7 years related experience plus proven capability in an engineering design firm. Minimum of 3 years experience in design of oil & gas facilities with experience in front end and detailed design plus experience in AutoCAD. For Designer in the event of not finding suitable c and i dates, expatriates may be considered and shall have a minimum of 8 years related experience.
Junior Omani Designer - shall have a minimum of 2 years related experience in oil & gas facilities plus proven capability in an engineering design firm.
Company or Shell Group experience is preferred or equivalent.
Some level of field experience in construction & commissioning will be preferred.
Good spoken and written English and PC literate.
Senior Designer shall have good skills in management of a pool of Designers / drafts persons and also task planning to meet schedules. Hence must have good interpersonal and communication skills.
Senior Designer shall have abilities to effectively check the drawings prepared by Designers in the same discipline.
Underst and the requirements of the design quality system and meticulously ensure that these requirements are met.
Plan workload and type of work for other team members (with various qualifications) efficiently and ensure timely completion of the job.
Produce presentable and accurate drawings, including a consistency check.
Be aware of, and check, the interface between his own discipline and other disciplines at all stages of the design.
Ensure that all team members adhere strictly to Company safety regulations/standards.
Understanding and knowledge Shell Group DEP’s and International Standards.
Full understanding of “non-st and ard” Vendor documentation and its interface points with Company engineering documents.
Sound judgment: throughout the years various “standards” have been used in all the stations. Decisions are to be made based on acceptable quality for the custodian.
Actively train and encourage the development of Omani personnel to fulfill draftsperson and designer roles in the engineering team.
Implement Company, and where applicable, Client/Project policies and procedures.
Checking and preparation of design/engineering documentation.
Undertake tasks on behalf of Lead Designer or Lead Engineer as directed.
Undertake work in accordance with relevant Codes, Standards and Procedures.
Undertake surveys necessary to develop area of work assigned.
Maintain and develop current awareness of relevant engineering technology.
Maintain and develop current awareness of relevant Codes and Standards.
Liaise with other disciplines, departments, project personnel, vendors, etc.
Ensure all design drawings and documents are complete within the allocated hours and in accordance with the programme.
Preparation of detailed drawings and documents to the requirements
OTHER REQUIREMENTS: (ALL CANDIDATES MUST ALREADY BE IN THE GCC COUNTRIES)
Pipeline Designers
Civil Structural Designers
Electrical & Power Designers
Control & Automation Designers
Senior Designers Pipeline
PDMS Administrators: Mechanical Piping
PDMS Administrators: Electrical Design
PDMS Operators: Mechanical Piping
- PDMS Operators:Civil/Structural
- PDMS Operators: Control & Automation
- PDMS Operators:Electrical Design
Sr. PDMS Designer: Mechanical Piping
- Sr. PDMS Designer: Civil/Structural
- Sr. PDMS Designer:Control & Automation
- Sr. PDMS Designer: Electrical Design
Draught Person
Electrical Engineer- Infrastructure
Mechanical & Piping Specialist
Engineer- Civil Structural
Electrical Engineer
Material & Corrosion Specialist
Mechanical Rotating Specialist
Mechanical Engineer
Pipeline Engineer
Process Engineer
CAO & SCADA Engineer
Control & Automation Engineer
Hazop Leader
Instrumentation Engineer- Sour Services
IPF SIF Facilitator
Mechanical Engineer- Sour Services
Process Engineer- Sour Services
Project Engineer
Senior Designer Civil Structural
Senior Designer Control & Automation
Senior Designer Electrical
Senior Designer Mechanical & Piping
Senior Engineer Mechanical Piping Specialist
Senior Engineer Civil Structural
Senior Engineer Electrical
Senior Engineer- Integrity Specialist
Senior Engineer Material & Corrosion Specialist
Senior Engineer Mechanical Rotating Specialist
Senior Engineer Mechanical
Senior Engineer Pipeline
Senior Engineer Process
Senior Engineer- CAO & SCADA
Senior Engineer Control & Automation
Senior Power Station Engineer
Senior Power Systems Protection Engineer
Senior Power Systems Studies Engineer
Senior Project Engineer- Sour Services
Senior Project Engineer
Senior Substation & Oh Line Engineer
Technical Safety Engineer
If interested, please send me copies of your highest education certificates together with your passport copy ASAP. Also, if you know anyone else is interested to work in Oman , please have them send me a copy of their CV or you can pass on their contacts for me to call. Thanks and hope to hear from you soon.
Sue Gee Cheng
Recruitment Consultant
Air Energi
DL: +974 4462 0886
T: +974 443 2180
F:
M: +974 6689 0295
E: scheng@airenergi.com
No comments:
Post a Comment