PDMS COMMANDS: MOSTLY STRUCTURAL

PDMS COMMANDS: MOSTLY STRUCTRUAL

NEW STRU COPY $V1	COPIES STRU FROM 1 SITE TO ANOTHER
Q USERM	GIVES CREATORS NAME
Q PPLIN TOS START WRT/DATUM	GIVES TOP OF STEEL OF UB/UC
Q IDP @ WRT /DATUM	GIVES THE COORD OF A POINT
Q ADEG (DRAFT)	GIVES THE C/VIEW ANGLE (ie 90 DEG)
Q ANGLE (HVAC)	GIVES THE CE ANGLE
Q ATEX (DRAFT)	GIVES THE SLAB TEXT ATTRIBUTES
Q ATT	GIVES THE CE ATTRIBUTES
Q BANG	GIVES THE CE BETA ANGLE
Q BORE (PIPING)	GIVES THE PIPE INSIDE DIA.
Q BSRF (DRAFT)	GIVES THE ATTACHED DRG/SHT (DRWG LEVL)
Q BTEX (DRAFT)	GIVES THE TEXT/GLAB ATTRIBUTES
Q CHEI (DRAFT)	GIVES THE CHARACTER HEIGHT
Q CLL (PIPING)	GIVES THE PIPE BRANCH LENGTH
Q COL 4 (ETC)	GIVES THE ATTRIBUTED COLOUR (YELLOW)
Q COL ACT	GIVES THE CURRENT ACTIVE COLOUR
Q COL AIDS	GIVES THE CURRENT AID LINE COLOUR
Q COL CE	GIVES THE CURRENT ATTRIBUTED COLOUR
Q COL VIS	GIVES THE CURRENT VISIBLE COLOUR
Q CREF	GIVES THE CONNECTION REFERENCE
Q CUTL	GIVES THE CE CUT LENGTH
Q DDNAME (DRAFT)	GIVES THE DIMENSION OWNERS NAME
Q DER LEN	GIVES THE CE EXACT LENGTH
Q DESC	GIVES THE CE DESCRIPTION
Q DESP	GIVES THE CE PARAMETERS
Q DIR (DRAFT)	GIVES THE C/VIEW ANGLE (ie N)
Q DISPLAY	GIVES THE TOLERANCE & REPRES LEVELS
Q DMTXT (DRAFT)	GIVES THE DIM TEXT ATTRIBUTES
Q DNST	GIVES THE CE DENSITY
Q DPOS (DRAFT)	GIVES THE LDIM POSITION ON SHEET
Q DRNE	GIVES THE END CUT-PLANE DIRECTION
Q DRNS	GIVES THE START CUT-PLANE DIRECTION
Q DTER (DRAFT)	GIVES THE LAYER/LDIM TERM'TR DEFAULT
Q E	GIVES THE CE EAST CO-ORDINATE
Q ELEM	GIVES THE CE ELEMENT NAME
Q FPT (DRAFT)	GIVES THE STRA FROM POINT CO-ORDS
Q FRAD	GIVES THE PLOO/PAVE RADIU ie 100mm GIVES THE NEXTR/VERT RADIUS ie 100mm
Q FUNC	GIVES THE CE FUNCTION
Q GCOF	GIVES THE CE GROSS C OF G
Q GTYP	GIVES THE GENERIC TYPE i.e. OD, HP, TG
Q GWEI	GIVES THE CE GROSS WEIGHT
Q H (PIPE SUPPT)	GIVES THE CE HANDER HEAD CO-ORDS
Q HEI	GIVES THE CE (PLOO LVL) PLT THK
Q HPOS (PIPING)	GIVES THE CE PIPE HEAD CO-ORDINATES
Q HT (PIPE SUPT)	GIVES THE CE HANDER TAIL CO-ORDS
Q IDP @ WRT /*	GIVES THE CE P POINT CO-ORDINATES
Q IDPL @	GIVES THE PLINE NAME USING CURSOR
Q INREF	GIVES THE CE IN REFERENCE
Q ISPEC (PIPING)	GIVES THE CE (PIPE) INSULATION
Q ITLE	GIVES LENGTH OF IMPLIED TUBE
Q JLIN	GIVES THE CE JOINT LINE
Q JUSL	GIVES THE CE JUSTIFICATION LINE
Q LASTMOD	GIVES THE DAT STRU WAS LAST MODIFIED
Q LEN (DRAFT)	GIVES THE STRA LENGTH
Q LEV	GIVES THE CE LEVEL (OBSTRUCTION ETC)
Q LHEI (DRAFT)	GIVES THE TEST LETTER HEIGHT
Q LIST	GIVES THE CE FITTINGS (NEG EXTR. ETC)
Q LOCK	GIVES THE LOCK STATUS
Q LSHAPE (DRAFT)	GIVES THE LABEL LEADER LINE STATUS
Q MATREF	GIVES THE CE MATERIAL REF
Q MCOUNT	GIVES THE NOS OF SUB MEMBERS IN CE
Q MCOUNT SCTN	GIVES THE NOS OF SCTN MEMBERS IN CE
Q MDB	GIVES THE PROJECT DATABASE
Q MEM	GIVES THE CE MEMBERS
Q MEML	GIVES THE CE MEMBER LINE
Q MIDP	GIVES THE CE MIDPOINT CO-ORDINATES
Q MPT (DRAFT)	GIVES THE STRA MID POINT CO-ORDS
Q MTLE	GIVES LENGTH OF MATERIAL TUBE
Q MTLL	GIVES CL LENGTH OF MATERIAL TUBE
Q MTO	GIVES THE CE MTO STATUS
Q NAM	GIVES THE CE NAME
Q NCOF	GIVES THE CE NET C OF G
Q NSRF	GIVES THE CE NET SURFACE
Q NVOL	GIVES THE CE NET VOLUME
Q NWEI	GIVES THE CE NET WEIGHT
Q OBS	GIVES THE CE OBSTRUCTION LEVEL
Q ORI	GIVES THE CE ORIENTATION (SLOPE)
Q OSRF	GIVES THE SHEET OVERLAY (VIEW ONLY)
Q OWN	GIVES THE CE OWNER
Q PA (PIPING)	GIVES TE C ARRIVE CO-ORDINATES
Q PARA	GIVES THE CE PARAMETERS ie SERIAL SIZES
Q PH (PIPING)	GIVES THE CE PIPE HEAD ATTRIBUTES
Q PH BORE (PIPING)	GIVES THE CE (PIPE HEAD) BORE
Q PH OD (PIPING)	GIVES THE CE (PIPE HEAD) DIAMETER
Q PI WRT/* (PIPING)	GIVES THE CE (PIPE SUPPORT) LOCATION
Q PKEY (DRAFT)	GIVES THE DIM PLINE STATUS (ie TCTF)
Q PL WRT/* (PIPING)	GIVES THE CE HVAC LEAVE CO-ORDINATES
Q PLNA	GIVES THE PLINE NAMES
Q PLTXT (DRAFT)	GIVES THE PROJ TEST ATTRIBUTES
Q POS	GIVES THE CE CO-ORDINATES (START)
Q POS FITT	GIVES THE C/FITT CO-ORDINATES (START)
Q POS IDPL @	GIVES THE PLINE CO-ORD AT CE START
Q POS IN $V1	GIVES THE CE DISTANCE TO VAR. $V1
Q POS PIN1 WRT/*	GIVES THE CE CO-ORDINATES OF PIN 1
Q POS PLRF (DRAFT)	GIVES TE CURRENT VSEC CO-ORDS
Q POS POPLI NA PROP 0.5	GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/A
Q POS PPL1 BOS WRT/*	GIVES THE BOS PLINE CO-ORDINATES
Q POS WRT TO ID@	GIVES THE DIST FROM CE TO START OF IDENTIFIED MEMBER
Q POS1 WRT/*	GIVES THE CE CO-ORDINATES OF PIN 1
Q POSE	GIVES THE CE END CO-ORDINATES
Q POSPPLI NA PROP 0.5	GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/A
Q POSS	GIVES THE CE START CO-ORDINATES
Q POSS POSE	GIVES THE CE BOTH END CO-ORDINATES
Q POST FITT	GIVES THE C/FITT CO-ORDINATES (START)
Q POST IN $V1	GIVES THE CE DISTANCE TO VAR.$V1
Q POST PLRF (DRAFT)	GIVES THE CURRENT VSEC CO-ORDS
Q PRLS	GIVES THE DESP NAME TYPES
Q PT (PIPING)	GIVES THE CE (PIPE TAIL) ATTRIBUTES
Q PT OD (PIPING)	GIVES THE CE (PIPE TAIL) DIAMETER
Q PURP	GIVES THE STRU PURPOSE ATTRIBUTE
Q RAD (HVAC)	GIVES THE CE RADIUS
Q RCOD (DRAFT)	GIVES THE VIEW ORIENTATION
Q REF	GIVES THE CE PDMS REFERENCE NO
Q REPRES	GIVES THE CE REPRESENTATION STATUS
Q RRSF (DRAFT)	GIVES THE CURRENT VIEW RULE SETTINGS
Q SIZE (DRAFT)	GIVES THE VIEW O/ALL DIMENSIONS
Q SJUS	GIVES THE PLOO JUSTIFICATION ie UTOP, DCEN, DBOT
Q SNAP (DRAFT)	GIVES THE SNAP SETTING (ON/OFF)
Q SPRE	GIVES THE CE SPECIFICATION REFERENCE
Q STEXT	GIVES THE ATT PENETRATION IDENT
Q TCTL OR (Q CUTL)	GIVES THE CE CUT LENGTH
Q THMRF (DRAFT)	GIVES THE CE (SYMBOL) NAME
Q THPOS (DRAFT)	GIVES THE C/VIEW MATCHLINE CO-ORDS
Q TPOS (PIPING)	GIVES THE CE PIPE TAIL CO-ORDS
Q TPT (DRAFT)	GIVES THE STRA TAIL POINT CO-ORDS
Q TULE	GIVES THE BRANCH TUBE LENGTH
Q TYPE	GIVES THE CE TYPE ie SCTN, PANE
Q USER	GIVES THE CE USER DATABASE
Q USERMOD	GIVES THE LAST USER LOGIN ID (STRU)
Q VLIMITS (DRAFT)	GIVES THE VIEW LIMITS
Q VOL CE	GIVES THE CE VOLUME
Q: DTYPE	GIVES THE FRMW STYLE TYPE (ie STLS)
Q: STATUS	GIVES THE CE STRU STATUS ie 'AFC'
Q:SWCODE	GIVES THE CE WEIGHT CODE

SEE ALSO:

PDMS Commands  

PDMS Latest Commands 

PDMS TIPS & TRICKS  

PDMS Latest Commands

PDMS Latest Commands
PDMS COMMANDS: MOSTLY STRUCTURALPDMS TIPS & TRICKSPDMS COMMANDS TIPS & TRICKS VIDEO