API STANDARD NAME AND ITS DESCRIPTION
|
STANDARD NAME | DESCRIPTION |
| API 570 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems |
| API 570 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems |
| API 615 | Valve Selection Guide |
| API 6AM | Technical Report on Material Toughness |
| API Bull 16J | Comparison of Marine Drilling Riser Analyses |
| API Bull 91 | Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine Environment |
| API Bull 939-E | Identification, Repair, and Mitigation of Cracking of Steel Equipment in Fuel Ethanol Service |
| API Manual | MANUAL OF PETROLEUM MEASUREMENT STANDARDS |
| API Publ 932-B | Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems |
| API Publ 935 | Thermal Conductivity Measurement Study of Refractory Castables |
| API Publ 937-A | Study to Establish Relations for the Relative Strength of API 650 Cone Roof, Roof-to-Shell and Shell-to-Bottom Joints |
| API Publ 938-A | An Experimental Study of Causes and Repair of Cracking of 11/4Cr-1/2Mo Steel Equipment |
| API Publ 938-B | Use of 9Cr-1Mo-V (Grade 91) Steel in the Oil Refining Industry |
| API Publ 939-B | Repair and Remediation Strategies for Equipment Operating in Wet H2S Service |
| API Publ 946 | The Effect of Outgassing Cycles on the Hydrogen Content in Petrochemical Reactor-Vessel Steels |
| API Publ 959 | Characterization Study of Temper Embrittlement of Chromium-Molybdenum Steels |
| API RP 11V10 | Recommended Practices for Design and Operation of Intermittent and Chamber Gas-Lift Wells and Systems |
| API RP 11V2 | Gas Lift Valve Performance Testing |
| API RP 11V5 | Operation, Maintenance, Surveillance and Troubleshooting of Gas-Lift Installations |
| API RP 11V6 | Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves |
| API RP 11V7 | Recommended Practice for Repair, Testing and Setting Gas Lift Valves |
| API RP 11V8 | Recommended Practice for Gas Lift System Design and Performance Prediction |
| API RP 14B/ISO 10417:2004 | Design, Installation, Repair and Operation of Subsurface Safety Valve Systems |
| API RP 14C | Analysis, Design, Installation and Testing of Basic Surface Safety Systems on Offshore Production Platforms |
| API RP 14E | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems |
| API RP 14G | Recommended Practice for Fire Prevention and Control on OpenType Offshore Production Platforms |
| API RP 14H | Recommended Practice for Installation, Maintenance and Repair of |
| Surface Safety Valves and Underwater Safety Valves Offshore | |
| API RP 14J | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities |
| API RP 15CLT | Recommended Practice for Composite Lined Steel Tubular Goods |
| API RP 15S | Qualification of Spoolable Reinforced Plastic Line Pipe |
| API RP 15TL4 | Care and Use of Fiberglass Tubulars |
| API RP 16Q | Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems |
| API RP 170 | Recommended Practice for High Integrity Pressure Protection Systems (HIPPS) |
| API RP 17A/ISO 13628-1:2005 | Design and Operation of Subsea Production Systems—General Requirements and Recommendations |
| API RP 17B/ISO 13628-11:2007 | Recommended Practice for Flexible Pipe |
| API RP 17C/ISO 13628-3:2000 | Recommended Practice on TFL (Through Flowline) Systems |
| API RP 19G9 | Design, Operation, and Troubleshooting of Dual Gas-lift Wells |
| API RP 53 | Blowout Prevention Equipment Systems for Drilling Operations |
| API RP 551 | Process Measurement Instrumentation |
| API RP 553 | Refinery Control Valves |
| API RP 571 | Damage Mechanisms Affecting Fixed Equipment in the Refining Industry |
| API RP 574 | Inspection Practices for Piping System Components |
| API RP 574 | Inspection Practices for Piping System Components |
| API RP 576 | Inspection of Pressure-relieving Devices |
| API RP 577 | Welding Inspection and Metallurgy |
| API RP 578 | Material Verification Program for New and Existing Alloy Piping Systems |
| API RP 578 | Material Verification Program for New and Existing Alloy Piping Systems |
| API RP 582 | Recommended Practice Welding Guidelines for the Chemical, Oil,and Gas Industries |
| API RP 582 | Recommended Practice Welding Guidelines for the Chemical, Oil, and Gas Industries |
| API RP 591 | Process Valve Qualification Procedure |
| API RP 5A3/ISO 13678 | Recommended Practice on Thread Compounds for Casing, Tubing, |
| Line Pipe, and Drill Stem | |
| API RP 5A5/ISO 15463 | Field Inspection of New Casing, Tubing, and Plain-end Drill Pipe |
| API RP 5C1 | Recommended Practice for Care and Use of Casing and Tubing |
| API RP 5C5/ISO 13679 | Recommended Practice on Procedures for Testing Casing and Tubing |
| Connections | |
| API RP 5C6 | Welding Connections to Pipe |
| API RP 5C7 | Recommended Practice for Coiled Tubing Operations in Oil and Gas |
| Well Services | |
| API RP 5L1 | Recommended Practice for Railroad Transportation of Line Pipe |
| API RP 5L2 | Recommended Practice for Internal Coating of Line Pipe for Non- |
| Corrosive Gas Transmission Service | |
| API RP 5L3 | Recommended Practice for Conducting Drop-Weight Tear Tests on |
| Line Pipe | |
| API RP 5L7 | Recommended Practice for Unprimed Internal Fusion Bonded Epoxy |
| Coating of Line Pipe | |
| API RP 5L8 | Field Inspection of New Line Pipe |
| API RP 5LW | Recommended Practice for Transportation of Line Pipe on Barges and |
| Marine Vessels | |
| API RP 5SI | Recommended Practice for Purchaser Representative Surveillance |
| and/or Inspection at the Supplier | |
| API RP 5UE | Recommended Practice for Ultrasonic Evaluation of Pipe |
| Imperfections | |
| API RP 621 | Reconditioning of Metallic Gate, Globe, and Check Valves |
| API RP 651 | Cathodic Protection of Aboveground Storage Tanks |
| API RP 652 | Lining of Aboveground Petroleum Storage Tank Bottoms |
| API RP 6DR | Repair and Remanufacture of Pipeline Valves |
| API RP 6HT | Heat Treatment and Testing of Large Cross Section and Critical |
| Section Components | |
| API RP 7A1 | Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections |
| API RP 7G | Recommended Practice for Drill Stem Design and Operating Limits |
| API RP 7G-2/ISO 10407-2:2008 | Recommended Practice for Drill Stem Element Inspection |
| API RP 7HU1 | Safe Use of 2-Inch Hammer Unions for Oilfield Applications |
| API RP 7L | Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment |
| API RP 934-A | Materials and Fabrication Requirements for 2-1/4/3Cr Alloy Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service |
| API RP 934-C | Materials and Fabrication of 1-1/4CR- 1/2Mo Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at or Below 825 °F (441 °C) |
| API RP 939-C | Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries |
| API RP 941 | Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants |
| API RP 945 | Avoiding Environmental Cracking in Amine Units |
| API Spec 11D1/ISO 14310:2008 | Packers and Bridge Plugs |
| API Spec 11IW | Specification for Independent Wellhead Equipment |
| API Spec 11V1 | Specification for Gas Lift Equipment |
| API Spec 14A/ISO 10432:2004 | Specification for Subsurface Safety Valve Equipment |
| API Spec 14L/ISO 16070:2005 | Specification for Lock Mandrels and Landing Nipples |
| API Spec 15HR | High Pressure Fiberglass Line Pipe |
| API Spec 15LE | Polyethylene (PE) Line Pipe |
| API Spec 15LR | Low Pressure Fiberglass Line Pipe |
| API Spec 16A/ISO 13533:2001 | Specification for Drill-through Equipment |
| API Spec 16C | Choke and Kill Systems |
| API Spec 16F | Specification for Marine Drilling Riser Equipment |
| API Spec 16R | Marine Drilling Riser Couplings |
| API Spec 17D | Subsea Wellhead and Christmas Tree Equipment |
| API Spec 17E | Specification for Subsea Umbilicals |
| API Spec 17F/ISO 13628-6:2006 | Specification for Subsea Production Control Systems |
| API Spec 17J/ISO 13628-2:2006 | Specification for Unbonded Flexible Pipe |
| API Spec 17K/ISO 13628-10:2005 | Specification for Bonded Flexible Pipe |
| API Spec 19G1 | Side-pocket Mandrels |
| API Spec 19G2/ISO 10708-2 | Flow-control Devices for Side-pocket Mandrels |
| API Spec 5B | Specification for Threading, Gauging, and Thread Inspection of |
| Casing, Tubing, and Line Pipe Threads | |
| API Spec 5CRA/ISO 13680 | Specification for Corrosion Resistant Alloy Seamless Tubes for Use as |
| Casing, Tubing and Coupling Stock | |
| API Spec 5CT/ISO 11960 | Specification for Casing and Tubing |
| API Spec 5DP/ISO 11961 | Specification for Drill Pipe |
| API Spec 5L/ISO 3183 | Specification for Line Pipe |
| API Spec 5L9 | Recommended Practice for External Fusion Bonded Epoxy Coating of Line Pipe |
| API Spec 5LC | Specification for CRA Line Pipe |
| API Spec 5LCP | Specification on Coiled Line Pipe |
| API Spec 5LD | CRA Clad or Lined Steel Pipe |
| API Spec 5ST | Specification for Coiled Tubing |
| API Spec 6A/ISO 10423 | Specification for Wellhead and Christmas Tree Equipment |
| API Spec 6AV1 | Specification for Verification Test of Wellhead Surface Safety Valves |
| and Underwater Safety Valves for Offshore Service | |
| API Spec 6D/ISO 14313 | Specification for Pipeline Valves |
| API Spec 6DSS/ISO 14723 | Specification for Subsea Pipeline Valves |
| API Spec 6FA | Fire Test for Valves |
| API Spec 6FB | Specification for Fire Test for End Connections |
| API Spec 6FC | Specification for Fire Test for Valves With Automatic Backseats |
| API Spec 6FD | Specification for Fire Test for Check Valves |
| API Spec 6H | Specification on End Closures, Connectors, and Swivels |
| API Spec 7-1/ISO 10424-1 | Specification for Rotary Drill Stem Elements |
| API Spec 7-2/ISO 10424-2:2007 | Specification for Threading and Gauging of Rotary Shouldered Thread Connections |
| API Spec 7F | Oil Field Chain and Sprockets |
| API Spec 7K | Drilling and Well Servicing Equipment |
| API Spec 7NRV | Specification on Non-Return Valves |
| API Std 2000/ISO 28300 | Venting Atmospheric and Low-pressure Storage Tanks |
| API Std 2510 | Design and Construction of LPG Installations |
| API Std 520 | Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries |
| API Std 521/ISO 23251:2006 | Guide for Pressure-relieving and Depressuring Systems |
| API Std 526 | Flanged Steel Pressure-relief Valves |
| API Std 527 | Seat Tightness of Pressure Relief Valves |
| API Std 579-1/ASME FFS-1 | Fitness-For-Service |
| API Std 594 | Check Valves: Flanged, Lug, Wafer and Butt-welding |
| API Std 598 | Valve Inspection and Testing |
| API Std 599 | Metal Plug Valves-Flanged, Threaded and Welding Ends |
| API Std 5T1 | Standard on Imperfection Terminology |
| API Std 600 | Steel Gate Valves—Flanged and Butt-welding Ends, Bolted Bonnets |
| API Std 602 | Steel Gate, Globe, and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries |
| API Std 603 | Corrosion-Resistant, Bolted Bonnet Gate Valves--Flanged and Butt-Welding Ends |
| API Std 607 | Fire Test for Quarter-turn Valves and Valves Equipped with Non-Metallic Seats |
| API Std 608 | Metal Ball Valves—Flanged, Threaded and Butt-Welding Ends |
| API Std 609 | Butterfly Valves: Double-flanged, Lug- and Wafer-type |
| API Std 610/ISO 13709:2003 | Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries |
| API Std 611 | General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services |
| API Std 612/ISO 10437:2003 | Petroleum petrochemical and natural gas industries—Steam turbines —Special-purpose applications |
| API Std 613 | Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Services |
| API Std 614/ISO 10438-1:2007 | Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services |
| API Std 616 | Gas Turbines for the Petroleum, Chemical and Gas Industry Services |
| API Std 617 | Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services |
| API Std 618 | Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services |
| API Std 619/ISO 10440-1 | Rotary-Type Positive Displacement Compressors for Petroleum, Petrochemical and Natural Gas Industries |
| API Std 620 | Design and Construction of Large, Welded, Low-Pressure Storage Tanks |
| API Std 622 | Type Testing of Process Valve Packing for Fugitive Emissions |
| API Std 625 | Tank Systems for Refrigerated Liquefied Gas Storage |
| API Std 650 | Welded Tanks for Oil Storage |
| API Std 653 | Tank Inspection, Repair, Alteration, and Reconstruction |
| API Std 660/ISO 16812:2007 | Shell-and-tube Heat Exchangers |
| API Std 670 | Machinery Protection Systems |
| API Std 671/ISO 10441:2007 | Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services |
| API Std 672 | Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services |
| API Std 673 | Centrifugal Fans for Petroleum, Chemical and Gas Industry Services |
| API Std 674 | Positive Displacement Pumps-Reciprocating |
| API Std 675 | Positive Displacement Pumps—Controlled Volume |
| API Std 676 | Positive Displacement Pumps—Rotary |
| API Std 677 | General-Purpose Gear Units for Petroleum, Chemical and Gas Industry Services |
| API Std 681 | Liquid Ring Vacuum Pumps and Compressors |
| API Std 682/ISO 21049:2004 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps |
| API Std 685 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Process Service |
| API Std 6A718 | Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and |
| Production Equipment | |
| API Std 936 | Refractory Installation Quality Control Specification - Inspection & Testing Monolithic Refractory Linings & Material |
| API TR 5C3/ISO 10400 | Technical Report on Equations and Calculations for Casing, Tubing, |
| and Line Pipe used as Casing or Tubing; and Performance Properties | |
| API TR 5TRSR22 | Technical Report in SR22 Supplementary Requirements for |
| Enhanced Leak Resistance LTC | |
| API TR 6AF | Technical Report on Capabilities of API Flanges Under Combinations |
| of Load | |
| API TR 6AF1 | Technical Report on Temperature Derating of API Flanges Under |
| Combination of Loading | |
| API TR 6AF2 | Technical Report on Capabilities of API Integral Flanges Under |
| Combination of Loading—Phase II | |
| API TR 6F1 | Technical Report on Performance of API and ANSI End Connections in |
| a Fire Test According to API Specification 6FA | |
| API TR 6F2 | Technical Report on Fire Resistance Improvements for API Flanges |
| API TR 6MET | Metallic Material Limits for Wellhead Equipment Used in High |
| Temperature for API 6A and 17D Applications | |
| API TR 932-A | The Study of Corrosion in Hydroprocess Reactor Effluent Air Cooler Systems |
| API TR 934-D | Technical Report on the Materials and Fabrication Issues of 11/4Cr-1/2Mo and 1Cr-1/2Mo Steel Pressure Vessels |
| API TR 938-C | Use of Duplex Stainless Steels in the Oil Refining Industry |
| API TR 939-A | Research Report on Characterization and Monitoring of Cracking in Wet H2S Service |
| API TR 939-D | Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol— Review, Experience Survey, Field Monitoring, and Laboratory Testing |
| API TR 939-D | Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol—Review, Experience Survey, Field Monitoring, and Laboratory Testing |
| API TR 941 | The Technical Basis Document for API RP 941 |
| API TR 950 | Survey of construction Materials and corrosion in Sour Water Strippers—1978 |
Good
ReplyDelete