SENIOR PIPING DESIGNER-BRUNEI
QUALIFICATION
(a) Hold a recognised qualification in engineering draughting, CGLI or equivalent
(b) Have at least ten (10) years of practical experience as a designer in the specific discipline of which at least two (2) years shall have been spent in the overall coordination of a multi-discipline design office in the offshore and onshore oil and gas industry.
(c) Be experienced in the Quality Control, requirements and general management of a multi-discipline design office.
(d) Duties shall includes: preparation of manhour estimates, detailed planning and scheduling for the draughting work to be carried out
• Preparing sketches/proposals for the designers and draftsperson to develop into detailed design drawings
• Preparation of process of flow scheme (PFS), process and engineering flow scheme (PEFS) cause and effect matrix, logic diagrams, general arrangement drawings, layouts, isometrics, etc,; and will be expected to carry out checks on the drawings produced by his section
• Make basic design calculations and must be familiar with both industry and Shell Standard and should have a sound working knowledge of Computer Aided Draughting (CAD), AutoCAD techniques, INTools, and be responsible for directing and coordinating the work for CAD
• Supervision of the training/development of new trainee draftsperson and students.
PIPING DESIGNER
(a) Hold a recognised qualification in engineering draughting, CGLI or equivalent and have at least seven (7) practical experience as a designer in the specific discipline in the offshore and onshore oil and gas industry.
(b) Be knowledge in the Quality Control, requirements and general management of a multi-discipline design office.
(c) Duties will include the following types of work:
• Capable of preparing sketches/proposals for the designers and draftsperson to develop into detailed design drawings.
• Fully understand the preparation of process flow scheme (PFS), process and engineering flow scheme (PEFS) cause and effect matrix, logic diagrams, general arrangement drawings, layouts, isometrics, etc.; and will be expected to carry out checks on the drawings produced by his section.
• Required to make basic design calculations and must be familiar with both industry and Shell Standards and should have a sound working knowledge of Computer Aided Draughting (CAD), AutoCAD techniques, INTools, and be responsible for directing and coordinating the work for CAD.
• Supervise the training/development of new trainee draftsperson and students
We are urgently seeking for interested candidates to undertake the following positions below for BRUNEI. These are Permanent. If you are interested, please send us your suitable UPDATED CV as per above descriptions with the requested documents/details per return.
Bhuvan Kumar
Engineering Manpower Consultants (Oil & Gas)
Bhuvankumar Consulting, India
Mob: +91-9873720765, 9212575722
Email: business@bhuvankumar.com
Please note: We do not charge any sort of fees whatsoever from the Candidates.
QUALIFICATION
(a) Hold a recognised qualification in engineering draughting, CGLI or equivalent
(b) Have at least ten (10) years of practical experience as a designer in the specific discipline of which at least two (2) years shall have been spent in the overall coordination of a multi-discipline design office in the offshore and onshore oil and gas industry.
(c) Be experienced in the Quality Control, requirements and general management of a multi-discipline design office.
(d) Duties shall includes: preparation of manhour estimates, detailed planning and scheduling for the draughting work to be carried out
• Preparing sketches/proposals for the designers and draftsperson to develop into detailed design drawings
• Preparation of process of flow scheme (PFS), process and engineering flow scheme (PEFS) cause and effect matrix, logic diagrams, general arrangement drawings, layouts, isometrics, etc,; and will be expected to carry out checks on the drawings produced by his section
• Make basic design calculations and must be familiar with both industry and Shell Standard and should have a sound working knowledge of Computer Aided Draughting (CAD), AutoCAD techniques, INTools, and be responsible for directing and coordinating the work for CAD
• Supervision of the training/development of new trainee draftsperson and students.
PIPING DESIGNER
(a) Hold a recognised qualification in engineering draughting, CGLI or equivalent and have at least seven (7) practical experience as a designer in the specific discipline in the offshore and onshore oil and gas industry.
(b) Be knowledge in the Quality Control, requirements and general management of a multi-discipline design office.
(c) Duties will include the following types of work:
• Capable of preparing sketches/proposals for the designers and draftsperson to develop into detailed design drawings.
• Fully understand the preparation of process flow scheme (PFS), process and engineering flow scheme (PEFS) cause and effect matrix, logic diagrams, general arrangement drawings, layouts, isometrics, etc.; and will be expected to carry out checks on the drawings produced by his section.
• Required to make basic design calculations and must be familiar with both industry and Shell Standards and should have a sound working knowledge of Computer Aided Draughting (CAD), AutoCAD techniques, INTools, and be responsible for directing and coordinating the work for CAD.
• Supervise the training/development of new trainee draftsperson and students
We are urgently seeking for interested candidates to undertake the following positions below for BRUNEI. These are Permanent. If you are interested, please send us your suitable UPDATED CV as per above descriptions with the requested documents/details per return.
Bhuvan Kumar
Engineering Manpower Consultants (Oil & Gas)
Bhuvankumar Consulting, India
Mob: +91-9873720765, 9212575722
Email: business@bhuvankumar.com
Please note: We do not charge any sort of fees whatsoever from the Candidates.
No comments:
Post a Comment