Piping Designer Job in Technip Qatar

Piping Designer

Company
Technip Middle East
Experience
6-10 years

Date
2011-05-24
Salary
Competitive

Category
Engineering, Procurement & Construction (EPC)
Start date
ASAP

Region
Middle East
Duration
6 Months

Location
Doha
Country
Qatar

Description of Piping Designer

Technip is looking for a Piping Engineer.
Purpose and Scope
The Piping Designer is mainly concerned with the preparation of design deliverables for projects and proposals based on Senior Designers' instructions studies and according to quality standards and client requirements.
Key Responsibilities:
1. Generate piping drawings and associated documents such as required for the Project or proposal;
2. Execute the Piping Studies necessary for a project
3. Develop Final Piping General Arrangement, as per GE-A 353-03, based on layout input from Senior Designers
4. Check 3D Model drafting output
5. Check Pipe Support drafts
6. Produce layout information for 3D model drafting, and check drafted output.
7. Co-ordinate with other Disciplines so seek input and discuss development of the design and for checking on layout drawings, IDC is as per GENERAL WORKING PROCEDURE and Protocol Generate Section 1.3.
8. Ensure that all output conforms with the TPME and Project Quality Management System. Monitor QA Activities within the Division; Guide People to overcome any QA Problem they face; Carry out QA audits; Arrange QA Induction of new persons into the discipline; Update and Keep track Of QA Documents Issued by QA/ Piping Discipline.
9. Contribute towards, maintain and implement both company and client HSE Management System objectives and procedures.
10. Complying with the applicable company procedures for the Engineering Department and the Piping Discipline as they are documented in Department Working Procedure as well as those procedures in the references listed therein.
Operational Duties:
The Designer reports functionally to the Discipline Engineers and Senior Designers and operationally to an assigned Engineer or Lead Engineer depending on project size and scope.
He is responsible, within his individual Specialties, to supervise one or a group of draftsmen, depending on the importance of each contract. He will also be capable of completing and accomplishing certain duties himself, such as:
- Supervising material take off activities
- Co-ordination with other specialist departments
- Reviewing documents and drawings before issuing
As QMR whenever assigned, responsible to ensure that the I'PAD quality system is understood by Discipline members and that the Quality Management System is implemented.
As HSE Representative, whenever assigned, responsible to ensure that the TPME HSE Management system is understood and implemented by Discipline members.

Skills required for Piping Designer

Educational Requirements: BSc in Engineering
Experience Requirement: Total of 6 years experience, Specific Experience Areas Piping Engineering design, offshore/onshore and Design in 3D environment
Computer Skills: Candidate should posses basic knowledge of:Microstation ,MS Word,MS Excel,Smart Sketch
Candidate should have advanced skills in: AutoCAD,PDS (3D)
Languages: English
Personal: In addition, the candidate to this position must demonstrate:
- Good Level of Creativity/Initiative
- Good Communication Skills
- Good Analytical Skills
- Good Leadership Skills