Share this post:
SOLID WORKS PIPING TRAINING MANUAL DOWNLOAD
THIS MANUAL COVERS THE FOLLOWING TOPICS
Activate SolidWorks Piping
Set Piping Options
Understand the required features of piping parts
Understand the process of creating a piping sub-assembly
Start a pipe route assembly by mating the first flange.
Add a standard tee to the pipe route assembly.
Add flanges and butterfly valves.
Butt standard piping parts together.
Add Victaulic couplings.
Add other mated flanges to the same route assembly
Add a custom elbow (cut elbow other than the Default 90 degree
that is most applicable to butt welded pipe cases.)
Route pipe in the 3D sketcher in reference to (directionally) other
surfaces of the assembly. Getting away from the standard (3 tab
key) axis’s that gets its orientation from the origin of the assembly.
Change a Long radius elbow (the Default) to a Short radius.
Add a standard 45 degree (long radius) elbow the route assembly.
Add a reducing elbow.
Add an eccentric reducer.
Butt custom elbows together.
Pipe to pipe penetration (or pipe saddling, chemical injection
points, drain points, and so forth.)
Stub-in or offset pipe intersections (example: Headers)
Adding mounting brackets to the pipe route.
Adding another route assembly (using START.PART)
AND MUCH MORE ON SOLIDWORKS PIPING
SOLIDWORKS PIPING LESSONS, SOLIDWORKS TRAINING MANUAL, SOLID WORKS TUTORIAL, SOLIDWORKS PIPING TUTORIAL, SOLID WORKS TRAINING MANUAL DOWNLOAD