TopBottom
Piping Engineering / Design Blog.

Followers

Engineers & Designer Required for Singapore

Posted by Antony Thomas at Friday, December 13, 2013

1. Piping Design Engineer at Singapore for 3 to 6 months, Min 5 years for FEED/Basic/Detail design experience with FPSO, CPP, WHP, Oil and Gas industries.

2. PDMS Piping Designers at Singapore for 3 to 6 months, Min 5 years, 3 years with PDMS Design Experience with FPSO, CPP, WHP, Oil and Gas industries.

CV should be send at jdpatel@karmen.com.sg along with joining time, position applied for, present salary and expected salary.

 

We are looking for the following engineers and designers with Oil and Gas design experience for FPSO/CPP/WHP/MNC engineering company.

1. Senior Instrumentation Design Engineers at Singapore

2. Principle Electrical/Instrumentation Design Engineer at Singapore

3. E&I PDMS Designer at KL, Malaysia

4. Instrumentation/Electrical Designer at Singapore

5. Senior Electrical Design Engineer at Singapore and KL, Malaysia

6. Senior Structure Design Engineer at Singapore

7. Senior Structure Designer at Singapore

8. Lead ICSS Engineer, KL, Malaysia

9. PDMS Structure Designer at Singapore and KL, Malaysia

10. Lead Vibration (Piping) Engineer at Qatar

Regards,

J D Patel

Director

Mobile:+65 90080051

Karmen Engineering Pte Ltd

www.karmen.com.sg

Piping Designer Singapore

SENIOR PIPING ENGINEER -KSA

Posted by Antony Thomas at Sunday, December 08, 2013

Location:
Middle East: Saudi Arabia
Type:
Contract

 

SENIOR PIPING ENGINEER

Requirements:

Graduate of any Engineering course preferably Mechanical

Contract Duration: 3 months contract

Location: Al Khobar, Saudi Arabia

Candidates must be Immediately Available

Experience in Piping Design Specifications and procedures, Pipe Wall Thickness Calculations, material specifications and datasheets, Requisitions, Technical Bid Evaluation, vendor data review and follow-up for piping materials.

Experience on valve design, package management or stress analysis are also optionally desired but design engineer activities involving 3D Model Reviews or PDMS / PDS activities are less important.

 

APPLY

WorleyParsons – Kuwait Engineering Opportunities

Posted by Antony Thomas at Saturday, December 07, 2013

WorleyParsons – Kuwait Opportunities


WorleyParsons have a number of key positions that remain to be filled for our Kuwait Oil Company (KOC) contract for the supply of Programme Management services. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.

The contract provides project management, co-ordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, up-grading of existing facilities, and the transfer of technology. WorleyParsons presently has nine projects under management, each of which is in the mega-project category.

WorleyParsons offers a comprehensive remuneration package – single/married status, tax free in Kuwait, international schooling, modern housing and approximately 45 working days' leave per year. For further information about Kuwait, please visit http://www.kuwaitliving.com.

How to apply?

Please select the position that is of interest to you and click on the corresponding link below to apply directly.

Deadline for applications is Thursday 12th December.
1.    Req. 37303 - Lead Design Mechanical Engineer I
2.    Req. 37306 - Lead Design Electrical Engineer 
3.    Req. 37307 - Lead Design Instrument & Control Engineer I
4.    Req. 37309 - Lead Design Process Engineer I
5.    Req. 37311 - Lead Design Civil / Structural Engineer I
6.    Req. 37313 - Lead Design Engineer - Architect
7.    Req. 37319 - Lead Construction Engineer I
8.    Req. 37320 - Lead Construction Engineer Mechanical
9.    Req. 37321 - Lead Construction Engineer Piping
10.  Req. 37323 - Lead Construction Engineer Electrical
11.  Req. 37324 - Lead Construction Engineer Instrumentation
12.  Req. 37325 - Lead Construction Engineer Civil / Structural
13.  Req. 37326 - Lead Construction Supervisor I (All Disciplines)


Labels:

SENIOR PIPING ENGINEER - QATAR

Posted by Antony Thomas at

SENIOR PIPING ENGINEER


Location: Middle East: Qatar
Type: Permanent
 

Great opportunity for an excellent SENIOR PIPING ENGINEER to join one of the largest EPCM companies based in Qatar.

Ideal candidate will demonstrate broad experience in Oil & Gas Brownfield and Greenfield facilities. Someone who has a strong character and able to lead a team of Engineers with an overriding commitment to health, safety and environmental responsibility whilst carrying out management of Piping Group's day to day activities / deliverables.

A successful candidate should be Degree Qualified in related field and holds in excess of 10 years' experience in Oil & Gas Industry having at least 3 years in the same position.  Applications from candidates who have worked or currently working for an EPCM company in the Middle East will be given significant preference.

Send your applications now and enjoy a TAX-free salary in Qatar!

Use below link to apply.

APPLY

Various Job openings in Muscat-Oman

Posted by Antony Thomas at Wednesday, December 04, 2013

Dear All,

Presently we have the below openings.

S. No
Discipline
Designation
Job Duration
Qualification
Experience
Openings
1
C&A
Senior Engineer
6-12 months
B.E.
8-10 years
2
2
C&A
Senior Designer
6-12 months
Diploma
8 years
1
3
Electrical
Senior Engineer
6-12 months
B.E.
8-10 years
2
4
Electrical
Senior Designer (OHL)
6-12 months
Diploma
8 years
1
5
Electrical
Senior Designer (SS)
6-12 months
Diploma
8 years
1
6
Electrical
Senior Designer
6-9 months+
Diploma
8 years
1
7
Civil
Senior Designer
6-12 months
Diploma
8 years
2
8
Process
Senior Designer
6-12 months
Diploma
8 years
1
9
Mechanical
Senior Rotating Engineer
6-12 months
B.E.
8-10 years
1
10

Senior Pipeline Engineer
6-12 months
B.E.
8-10 years
1
11

Senior Pipeline Designer
6-12 months
Diploma
8 years
1

For the above openings candidate with Front End Engineering Design(FEED) and Detail Design (DD) experience is must.

Industry : Oil & Gas

Job Location: Oman - Muscat

Job Type : Contract

Kindly forward your updated CV if you are interested for the above openings.

You can very well refer your friends for the above openings.

Thanks and Regards
T.Nallakumar
Culture and People Development
Barry-Wehmiller International Resources | Chennai
Mobile: 9884954889.
Ph: +91 44 4390 9100 Extn:411 | http://www.bwir.com/

Labels:

PDMS COMMANDS TIPS & TRICKS VIDEO

Posted by Antony Thomas at Monday, December 02, 2013

PDMS COMMANDS TIPS & TRICKS VIDEO


If you like this video, Pls use g+ to share with your friends.
You may also like the following videos:
PDMS TIPS-1 (ECC REDUCER FLAT SIDE TOP)
PDMS: HOW TO ROUTE THE PIPE ON TOP OF STEEL

Piping Stress Analyst’s Job Responsibilities:

Posted by Antony Thomas at

Piping Stress Analyst’s Job Responsibilities:




Piping stress engineer’s responsibilities are enumerated here.




ü  Ensure that applicable codes, standards, and procedures are followed.
ü  Ensure that forces and moments imposed on machinery and vessels by the attached piping are within allowable.
ü  Ensure that stresses in the piping system are within allowable.
ü  Ensure that piping is well supported.
ü  Control deflection of piping systems due to the effect of thermal expansion, gravity, pressure, and occasional loads such as wind, Seismic, PSV discharge, slug force.
ü  Design special supports and restraints.
ü  Identify critical systems and possible problem areas.
ü  Advise Piping Design of optimal equipment location to minimize redesign efforts.
ü  Transmit piping imposed loads to the appropriate Engineering discipline.
ü  Develop data sheets for spring hangers, expansion joints, snubbers, and other stress related components and issue requisitions to purchase items.

ü  Maintain and document all stress calculations and submit to client at the end of job.


Piping Stress engineer job, Piping stress analyst job description & Responsiblities

Hydrocarbon Processing's Refining Processes HandBook

Posted by Antony Thomas at Wednesday, November 27, 2013

Hydrocarbon Processing's Refining Processes HandBook

Hydrocarbon Processing Handbook download

Labels:

Basic Pipe Stress Analysis-PDF Download

Posted by Antony Thomas at Monday, November 25, 2013

BASIC PIPE STRESS ANALYSIS - PDF DOWNLOAD


BASIC PIPE STRESS ANALYSIS TRAINING

Labels:

PIPING DESIGNER -CONTRACT JOB - ABU DHABI

Posted by Antony Thomas at Thursday, November 14, 2013

Forwarded Mail...

Dear Candidate,

We are an ISO certified engineering consultancy firm located in Mumbai and branches in Chennai, Vizag, Delhi, Baroda and catering to major MNC's and EPC's in Oil & Gas, Refineries, Chemicals, & Petrochemicals

We have got following interesting job openings

Urgent Requirement - Piping Designer

Required Qualification


DIPLOMA, ITI

Industry Type

Refinery / Petrochemical / Chemical /Oil & Gas (preferred)

Experience : 10-16 Years

Tenure - 6 Months CONTRACT EXTENDABLE

Location - Abudhabi



Kindly send

your updated word format resume along with the following details

Relevant Exp:
Present CTC:
Expectation:
Joining Period:


Kindly treat this as very urgent.


Await your early response...

Note: Number of openings are available, we would be grateful to you, if you refer your friends / colleagues for further opening...

Please ignore this mail if your profile not matches this job requirement,


We have also got job openings in other fields both in India and Abroad, Kindly circulate this mail and refer your friends and colleagues


Thanks & Regards,

Alekya
HR Executive.

Aarvi Encon Pvt Ltd |
709/710 | 3rd Floor |
Prince Centre l Pathari Road |
AnnaSalai | Chennai-06 |
Tel : +91-44-43406670
E-Mail : alekya@aarviencon.com |
Web: www.aarviencon.com |

Fail Open & Fail Closed Control Station Assembly

Posted by Antony Thomas at Sunday, November 10, 2013

You can see Fail Closed (FC) or Fail Open (FO) control valves in P&ID. What does it mean?

What to do on this situation as Piping Designer.

Before going into action we need to know exactly what happens when the actuating medium fails(most of the cases Instrument Air). See the snap below. It is a control valve assembly extracted from a P&ID

 

 P&ID CONTROL VALVE ASSEMBLY FAIL CLOSE

 

 

 

If the actuating medium fails may be intentionally or accidentally will impact the position of the control valve depends on the type of the control valve.

 

 

Control Valve Fail action may be classified as

  • Fail Closed (FC)
  • Fail Open (FO)
  • Fail Indeterminate (FI)

Fail Closed (FC)

Say a P&ID calls for FC. That means when Instrument air goes off, the control valve will be in closed position. To remove the control valve for maintenance or replacement, we have to open the bye-pass valve and close two block valves one bye one. After closing the valve the fluid will be trapped between  first block valve and the control valve and also between control valve and the second block valve (remember the control valve is now in closed position). To remove the fluid and also depressurize the system we need to drain the fluid both upstream and downstream of the control valve.

So providing drains on both upstream and downstream will solve the problem

 

The below snapshot show the Fail Closed control valve.

 control valve -fail close FC

 

FAIL OPEN (FO)

Say a P&ID calls for FO. That means when Instrument air goes off, the control valve will be in Open position. To remove the control valve for maintenance or replacement, we have to open the bye-pass valve and close two block valves one bye one. After closing the valve the fluid will be trapped between  first block valve and the second block valve (remember the control valve is now in open position). To remove the fluid and also depressurize the system we need to drain the fluid both upstream and downstream of the control valve.

 

So providing drain on upstream or downstream will solve the problem

The below snapshot show the Fail Open Control valve.

 control valve -fail open FO

FAIL Indeterminate (FI)

Say a P&ID calls for FI (Fail Indeterminate). That means when Instrument air goes off, the control valve will be in the position. It will not change its position. To remove the control valve for maintenance or replacement, we have to open the bye-pass valve and close two block valves one bye one. For the worst case scenario if the control valve in closed position when the power goes off. To remove the fluid and also depressurize the system we need to drain the fluid both upstream and downstream of the control valve.

So providing drain on  both upstream and downstream will solve the problem

fc-control valve station

Labels:

WorleyParsons opportunities in Toronto – PMC Engineers

Posted by Antony Thomas at Thursday, October 24, 2013

WorleyParsons opportunities in Toronto – PMC Engineers

WorleyParsons Abu Dhabi office was recently awarded a contract by the Zakum Development Company (ZADCO – 28% owned by ExxonMobil) to provide Project Management Consultancy (PMC) services overseeing Front End Engineering Design (FEED) being executed by SNC Lavalin in Toronto.
The project involves an to upgrade to the existing Zirku Island onshore Oil and Gas facilities to processing levels of 1,000,000 BPD from the current 600,000 BPD in two phases. Phase 1 - 750K and Phase 2 – 1,000K. The crude oil is being produced in the Upper Zakum field, the second largest offshore field in the world with estimated recoverable oil reserves comprising 21 billion barrels. 
We urgently require engineers with a minimum of 10 years’ overall experience (which must include significant FEED experience) that are ready to work in Toronto for a minimum of 12 months. The terms and conditions for this project are attractive and there is longer-term potential for these roles.
If your skills and experience match the above criteria and the opportunity to work on this exciting project sounds of interest please apply directly via the links below.

Current open positions:
36301    Engineering Manager
36302    Lead Process Engineer
36303    Lead Instrument Engineer
36304    Lead Piping Engineer
36306    Rotating Engineer
36314    Loss Prevention/HSE Engineer
36311    Lead Electrical Engineer
36313    Lead Civil Engineer
For further information please contact Sam Brownrigg – Samuel.brownrigg@worleyparsons.com


Senior-PDS CHECKER - ONSHORE PROJECTS-WORLEYPARSONS

Posted by Antony Thomas at Sunday, October 20, 2013

Job Title: Principal Project Designer, Senior-PDS CHECKER - ONSHORE PROJECTS


Job Type: Full-time

Location of Job: Houston, TX 77027 US (Primary)

Job Description
·         PDS Checking and previous onshore experience required. Heavy checking experience. Must be able to supervise small groups and Interface with Customer.
·         Provide technical support, clarification and interpretation of task, code and standards requirements for all discipline design and drafting activities.
·         Reviews assigned projects discipline deliverables for technical quality, accuracy and compliance with Company standards.
·         Monitors assigned projects discipline manpower requirements to support established budgets and schedule.
·         Assure that all assigned discipline personnel are indoctrinated and current with Company, department, discipline, and project standards and procedures.
·         Review and approve assigned project discipline work scopes, work approaches, and estimates.
·         Review and approve submitted discipline Work Share Packages for assigned projects.
Job Requirements
·         Typically fifteen years progressively responsible discipline related design experience; BS degree or completion of technical courses with 10+ years of relevant experience, including supervisory or lead position experience.
·         Senior Principal level design position responsible for supervising teams as well as performing difficult and complex work assignments involving independent judgment to determine a course of action consistent with established functional and organization's policies and goals. Strong understanding of basic engineering and/or design/drafting concepts. Has general understanding of other disciplines' roles in the design process.
·         Able to complete tasks in accordance with project procedures and recognized codes and standards. Able to discuss routine technical problems and communicate effectively with immediate supervisor and other project personnel. Able to utilize advanced PC, 2D CAD, and 3D CAD tools (if applicable), and other applicable hardware and software to perform duties. Understand and oversee advanced design as well as providing technical direction and training. Ability to meet deadlines and manage priorities is critical.
·         Commitment to customer service and ability to guide department personnel in partnership with and during manager's absence is essential. Ability to maintain confidential information critical.
·         Generally characterized as a "Senior", with the ability to conceptually interpret and guide the department program design and development. Able to lead and/or train project teams. Performs difficult drafting/design and/or technical support assignments, requiring the application of advanced drafting and fundamental design techniques, and engineering and mathematical principles, in accordance with established standards and procedures.
·         Typically will regularly interface with departmental staff and middle and upper management, and frequently with outside customers.
·         General attributes required of all WorleyParsons employees include: Zero Harm, Action Orientation, Building Effective Business Relationships, Commitment, Customer Focus, Dealing with Change, Drive for Results, Integrity and Trust, and Basic Leadership Skills.
·         Willingness to travel or to accept field assignments preferred.
·         Ability to work effectively in teams.
·         For CSA positions - Capability to perform field surveys and utilize survey equipment and transform data into CAD
·         PDS Checking Experience.
·         Supervisory Experience

Related Posts Plugin for WordPress, Blogger... follow us in feedly

Popular Posts

Piping Info