TopBottom
Piping Engineering / Design Blog.

Followers

Offsite Storage Tank Piping Arrangement

Posted by Antony Thomas at Monday, January 31, 2011

OFFSITE STORAGE TANK PIPING

One of the key factor that route offsite tank piping economically, in addition to safety, operability and accessibility for maintenance is to prepare a composition drawing.

COMPOSITE DRAWING

It is usually prepared before developing area-wise detailed drawings, and overall layout of piping is determined to obtain the most economical routing of pipes throughout the off-plot area. Then overall plot is divided into several small area for detail layout drawings, in which all pipes inside of the area drawn including those passing through.
Download the following attachment file for the whole reference.

See Also:
Piperack Design guidelines http://piping-info.blogspot.com

Damit WorleyParsons Engineering Vacancies in Brunei

Posted by Antony Thomas at Sunday, January 30, 2011


Dear All,


Damit WorleyParsons Engineering Vacancies:

·         Lead/Senior  Piping Engineer
·         Lead/Senior Process Engineer
·         Senior C&A Engineer
·         Senior C&A Designer
·         Lead/Senior Piping Engineer
·         Lead/Senior Piping Designer
·         Lead/Senior Mechanical Engineer
·         AutoCAD Administrator
·         Lead/Senior Technical Safety Engineer

WorleyParsons Momin Vacancies:

·         Construction Supervisor
·         Commissioning Engineer
·         Site HSE Coordinator
·         Site QA/QC Engineer
·         Senior Procurement Expeditor
·         Lead/Senior Procurement Purchaser
·         Project Cost Controller
·         Planning (EPCM) Engineer
·         Contracts Administrator



Best Regards,


Firdaus Deli
HR Coordinator | DWE/11
Damit WorleyParsons Engineering Sdn Bhd
Office Tel: 673 3341410
Fax: 673 3330396
Unit F112, Komplek Harapan,
Jalan Setia Di-Raja KA3131
P.O.Box 1692,
Kuala Belait, KA1189,
Brunei Darussalam

Labels:

PDMS TIPS-1 (ECC REDUCER FLAT SIDE TOP)

Posted by Antony Thomas at

Normally if you connect the eccentric reducer it will be placed Bottom Side Flat. So
HOW TO PUT THE ECCENTRIC REDUCER FLAT SIDE TOP IN PDMS THRU COMMAND?
Select the Eccentric Reducer and in command line enter the following command
CONN AND P3 IS U
SEE THE FOLLOWING YOUTUBE VIDEO

PDMS-TIPS AND TRICKS –1 (ECC REDUCER FLAT SIDE TOP)

SEE ALSO:
PDMS TIPS & TRICKS  http://piping-info.blogspot.com
Lot of PDMS Tips and Tricks

PDMS TIPS & TRICKS

Posted by Antony Thomas at Wednesday, January 26, 2011


PDMS TIPS & TRICKS

1.  If you want to invert the HEAD and Tail of a particular branch then select the branch and modify –> Hierarchy –> Reverse

2.     Normally in PDMS the precision set to 0 decimals. If you want to increase the Decimal points enter the following in the command prompt.
PREC 4 DP ( where 4 is the no. of decimal points)

3.     If you want to change only few values of a desparam you can use the following command
DESP n5 200 n8 500

This will change only the 5th and 8th parameter of a desparam

4.     If you are working in any modules (Equipment, Structures) and you want to use piping components creation form then use the following command in the PDMS command prompt.

Show _CDCOMP

5.     To Zoom in of the CE, type Auto CE.

6.     Put some items in the graphic view and use the following command
show !!gphmotion

(Auto rotation..Auto Zoom, Auto Whoble effects)

7.     Distance Measuring command
CONST DIST IDP@ TO IDP@ 
CONST DIST P0 TO P0 OF ID@ 
CONST DIST PA TO PA OF NEX


8.     Want help on your syntax (PDMS Commands) then type
show !!syntaxhelp

PIPING TRAINING COURSE, PDMS TRAINING, AVEVA PDMS TRAINING, PDMS TRAINING VIDEO, PDMS TUTORIAL VIDEO, PDMS SOFTWARE TRAINING,  PDMS SOFTWARE PIPING

Related Posts Plugin for WordPress, Blogger... follow us in feedly

Popular Posts

Piping Info